BEKO 1715S Flashing Prewash light

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › BEKO 1715S Flashing Prewash light

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 13, 2007 at 2:13 pm #25018
    Henney
    Participant

    HELP,

    Installed a BEKO 1715S and forgot to remove the waste pipe bung. As result the program is now stuck in pre wash, with the light continually flashing. Can anyone help! t

    ried turning off at the mains to reset the program but it didn’t make any difference?

    February 13, 2007 at 4:04 pm #204242
    iadom
    Moderator

    Re: BEKO 1715S Flashing Prewash light

    Try this,

    Turn power button off (not at wall)
    Select 90 degree wash
    Press Start and Cancel button down at same time for 3 seconds and turn power button on whilst still holding buttons down – Start light will flash.
    Leave power on.
    Select any Spin position.
    Press Start and Cancel button at same time again for 3 seconds – other buttons may start to flash – if they do, press Start and Cancel button together again for 3 seconds.
    Machine should be re-set ready for use.

    This information courtesy of trade member bazza500. 🙂

    Jim.

    May 10, 2007 at 8:39 pm #204243
    tradesite
    Participant

    Re: BEKO 1715S Flashing Prewash light

    Thank you very much for the last piece of valuable information! You have saved me a great deal of time and trouble and also given me a new customer that thinks I am brilliant! Once again THANKYOU !


    Nigel.

    June 26, 2007 at 10:05 am #204244
    funbobby
    Participant

    Re: BEKO 1715S Flashing Prewash light

    i tried this and letter h came up but still freezing any ideas?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.