BEKO 1715S Flashing Prewash light

[Henney]

HELP,

Installed a BEKO 1715S and forgot to remove the waste pipe bung. As result the program is now stuck in pre wash, with the light continually flashing. Can anyone help! t

ried turning off at the mains to reset the program but it didn’t make any difference?

[iadom]

Re: BEKO 1715S Flashing Prewash light

Try this,

Turn power button off (not at wall)
Select 90 degree wash
Press Start and Cancel button down at same time for 3 seconds and turn power button on whilst still holding buttons down – Start light will flash.
Leave power on.
Select any Spin position.
Press Start and Cancel button at same time again for 3 seconds – other buttons may start to flash – if they do, press Start and Cancel button together again for 3 seconds.
Machine should be re-set ready for use.

This information courtesy of trade member bazza500. 🙂

Jim.

[tradesite]

Re: BEKO 1715S Flashing Prewash light

Thank you very much for the last piece of valuable information! You have saved me a great deal of time and trouble and also given me a new customer that thinks I am brilliant! Once again THANKYOU !

Nigel.

[funbobby]

Re: BEKO 1715S Flashing Prewash light

i tried this and letter h came up but still freezing any ideas?

[Author]

Posts