AEG 91123253403

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG 91123253403

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 17, 2007 at 7:56 pm #25139
    goosegreen
    Participant

    Another AEG D/W fill fault. Called to the above model yesterday which was overfilling then going in to pump out. The machine has a 1 level pressure switch but this seems to be for a flood protection only, Any one know how water level is controlled?

    Regards

    goose

    February 17, 2007 at 7:59 pm #204645
    helo_75
    Participant

    Re: AEG 91123253403

    doesnt it have an iwms takn on the right hand side?

    big plastic chamber (intelligent water metering system)

    usually full of crap leading to overfill, thats if its a zanussi type!!!

    hope this helps

    February 17, 2007 at 10:30 pm #204646
    goosegreen
    Participant

    Re: AEG 91123253403

    helo_75

    Thats whats thrown me a bit with this one! it looks like a real AEG made machine, you know the one, removable lower back panel, red plastic flood protection switch fitted to base easy acces to element etc. Not like Zanus versions which go in to valve lock out for no reason at all. Didn’t have a lot of time when I called so will go back and have another look

    Thanks

    Goose

    February 19, 2007 at 3:51 pm #204647
    cab
    Participant

    Re: AEG 91123253403

    does have an iwms.

    check your mail.

    cab

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.