bosch WFL2260UK/04 FD 8005 609230

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch WFL2260UK/04 FD 8005 609230

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • February 22, 2007 at 6:28 pm #25293
    wishbone
    Participant

    hi, went to this today and clean out pressure system also filter etc.
    checked inlet valves and left on test.
    customer has phoned back to say it does wash okay but seems to skip rinses, then spins and ends with light flashing. going back tomorrow to
    have another look. anyone had this before ?
    any ideas much appreciated..
    thanks pete.

    February 22, 2007 at 8:01 pm #205260
    gegsy
    Participant

    Re: bosch WFL2260UK/04 FD 8005 609230

    Hi
    Will need to know what lamps are lit and/or flashing.
    You could check the fill valves :con:
    In what way does it skip ask her, she may just be using too much powder,leaving residue and making her think its not rinsing 😀

    Greg

    February 22, 2007 at 8:20 pm #205261
    wishbone
    Participant

    Re: bosch WFL2260UK/04 FD 8005 609230

    hi greg, checked the fill valves, all okay.
    she said went through cycle quicker than normal and ended with one light flashing, dont know which one. going back tomorrow, is there error codes for this model, couldnt find them in known error codes list….
    (only three lights on this model)

    February 22, 2007 at 8:27 pm #205262
    gegsy
    Participant

    Re: bosch WFL2260UK/04 FD 8005 609230

    Hi
    Check your email 😉

    Greg

    February 22, 2007 at 8:53 pm #205263
    wishbone
    Participant

    Re: bosch WFL2260UK/04 FD 8005 609230

    thanks that should help, how do you run the service programme ?

    February 23, 2007 at 8:24 am #205264
    wishbone
    Participant

    Re: bosch WFL2260UK/04 FD 8005 609230

    HELP calling back to this afternoon for another look.
    greg sent me the error codes but you need to run the service
    programme (also for last error) how do you start the test/service programme on this model ?
    thanks pete…..

    February 23, 2007 at 11:06 am #205265
    gegsy
    Participant

    Re: bosch WFL2260UK/04 FD 8005 609230

    Hi
    Sorted now, check email 😉

    Greg

    February 23, 2007 at 1:05 pm #205266
    wishbone
    Participant

    Re: bosch WFL2260UK/04 FD 8005 609230

    Thanks Greg…..

    February 23, 2007 at 11:52 pm #205267
    wishbone
    Participant

    Re: bosch WFL2260UK/04 FD 8005 609230

    called back today, no supply to inlet valves on rinses.
    connector to valves looked a bit burnt so cleaned up and checked
    back to connector at control board which tested okay.
    guess fault on control board but customer decided to replace
    machine.
    thanks for your help
    pete….

    February 23, 2007 at 11:53 pm #205268
    gegsy
    Participant

    Re: bosch WFL2260UK/04 FD 8005 609230

    No probs Pete , you’re welcome

    Greg

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.