Zanussi fl-1082 pcb gone – worth repairing ?

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi fl-1082 pcb gone – worth repairing ?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 22, 2007 at 6:46 pm #25294
    ajpepe72
    Participant

    last month the inner knob dial broke which was cheaply fixed, but now the pcb has gone (all black and burned on top). A new one on line is £160, is it worth repairing or would i better off spending an extra £100 on a new one (bosch or similar). would something else have caused the pcb to go as i wouldnt want to change it only for it to go again.
    also now this has happened the door wont open, is there a way of opening it manually ?

    February 22, 2007 at 7:23 pm #205269
    Alex
    Participant

    Re: Zanussi fl-1082 pcb gone – worth repairing ?

    When you say PCB, can I assume the board on the top of the timer. If so £160 is a bit extreme.

    I have 2 in stock and can send you one for £134.95 all inclusive. However, reading your post I suspect it is due to failure of the door lock.

    Alex

    February 22, 2007 at 7:27 pm #205270
    ajpepe72
    Participant

    Re: Zanussi fl-1082 pcb gone – worth repairing ?

    yes thats the one, I thought it was all one unit though , the timer and pcb.
    or can they be separated ?
    whats the normal cause of failure for them as well, could a new one fail if something else caused it ?

    February 26, 2007 at 10:16 pm #205271
    lfcjoey
    Participant

    Re: Zanussi fl-1082 pcb gone – worth repairing ?

    would strongly sugest an engineer be called because the board has blown for a reason, this needs to be investigated or it will blow the new board/timer…. and yes its all one unit.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.