INDESIT WIDL126 ERROR flashing

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › INDESIT WIDL126 ERROR flashing

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 23, 2007 at 12:01 am #25301
    gramp
    Participant

    lights 1 and 4 and red light flashing sometimes fills and pumps at the same time. panel and connections seem fine, cant reset by unpluging machine for a few minutes just starts flashing again.if anyone can help i would be greatfull. thanks.

    February 23, 2007 at 1:19 am #205288
    Penguin45
    Participant

    Re: INDESIT WIDL126 ERROR flashing

    Technically, it’s an EEPROM error. This is the little chip with the coding information for the big chip on the computer board. Well, probably…… The error codes are notoriously unreliable on these. The chip is available as a spare. If you are lucky, it clips into a holder; if not you’ll have to solder it to the computer board yourself. Tricky……

    Power off before touching anything,
    Regards,
    Penguin45.

    February 23, 2007 at 9:02 am #205289
    gramp
    Participant

    Re: INDESIT WIDL126 ERROR flashing

    thanks penguin 45 that was my worst fear . just could not find list of faults

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.