Constant water flow in Indesit WI121UK

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Constant water flow in Indesit WI121UK

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 3, 2007 at 2:52 pm #25539
    zarniwoop
    Participant

    ❓ Problem with an Indesit WI121UK… Wash cycle runs normally, but water is constantly running through tray number 1 (pre-wash), even when the cycle has finished. I’ve taken the top off the machine and pulled the electrical plug out of the water valve, and this stops the flow. So I guess the problem is in the controller board. Is this a known fault? Would replacing the controller solve the problem?

    March 3, 2007 at 5:10 pm #206287
    Penguin45
    Participant

    Re: Constant water flow in Indesit WI121UK

    Triac blown on module will cause this.

    Module is p/no C00093157, you need to transfer the eeprom across from your old board.

    An email to spares@ukwhitegoods.co.uk for prices and ordering if you choose to do this yourself.

    Power off, of course.

    Regards,
    Penguin45.

    March 4, 2007 at 12:49 pm #206288
    zarniwoop
    Participant

    Re: Constant water flow in Indesit WI121UK

    Thanks for the info. Before buying a new controller I’ll try changing the triac – it’s easy to identify and access on the board and I can obtain exactly the same components from RS for considerably less than a new board, so nothing to loose with trying 😉

    March 10, 2007 at 2:36 pm #206289
    zarniwoop
    Participant

    Re: Constant water flow in Indesit WI121UK

    Fixed by a 20p component. Great 😛

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.