Gorenje Built in Oven

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Gorenje Built in Oven

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 7, 2007 at 5:29 pm #25657
    Steven
    Participant

    My engineer went to this call month ago, blowing trip, tested it out, as usual no fault appeared would do this intermittanly.
    She has now called back to say fault is there again happening more now, any known faults with these?

    Thanks Steven

    March 7, 2007 at 5:43 pm #206911
    BobHope
    Participant

    Re: Gorenje Built in Oven

    Hi Steven

    model number and art number will help.

    Bob.

    March 8, 2007 at 1:26 pm #206912
    Steven
    Participant

    Re: Gorenje Built in Oven

    Gorenje Model EVP4442 IM B8980w Serial 31930021

    March 8, 2007 at 3:11 pm #206913
    BobHope
    Participant

    Re: Gorenje Built in Oven

    Hi Steven

    has the customer reported any fault codes.

    Bob

    March 12, 2007 at 3:27 pm #206914
    Steven
    Participant

    Re: Gorenje Built in Oven

    No; just to say its blowing her trip

    March 14, 2007 at 2:07 pm #206915
    Steven
    Participant

    Re: Gorenje Built in Oven

    Correct model now EVP444-421M B8980 serial 3190021 (695273) 18 mths old working fine until last month, total wattage 3.4KW has been wired to 13 amp plug but is on the seperate cooker point. takes out the main circuit breaker for the whole house not the individual breaker.
    Single Oven unit built in blowing trip intermittantly when door is opened/closed

    Went there yesterday Megged all machine out all elements fine,checked door switch etc no visable signs of shorting on switches etc
    So put it on test heating up fine, temperature ok, open & closed door during heat up all seemed fine, then about 5 or 6 time opened door when the stat clicked in then tripped off.
    Reset trip started working again.

    Any ideas
    Steven

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.