Zanussi DW908

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi DW908

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 9, 2007 at 5:34 pm #25714
    S1MON
    Participant

    I have been to this m/c today and it is doing a first fill with a wash. It stops washing and continues to fill then it will lock out. The next two clicks on he timer will do nothing and then the wash motor wil kick back into action. This is the same with all the programs.

    I have cleaned all the pipe underneath, cleaned the blue sypoon tubes and the sump. Ive tried a new valve and pressure switch but these havent made any difference!

    Im aware that this problem is usually pressure system related but it is totally clear. Done a few of these and never had this problem

    Any ideas

    March 9, 2007 at 10:32 pm #207310
    cab
    Participant

    Re: Zanussi DW908

    after this occurs, what happens when you take the syphon tubes out to inspect them?

    cab

    March 10, 2007 at 8:29 am #207311
    bobokines
    Participant

    Re: Zanussi DW908

    Have you got a hairline crack in one of the syphon tubes?

    Bob

    March 10, 2007 at 5:06 pm #207312
    S1MON
    Participant

    Re: Zanussi DW908

    well the syphons are totally clear, newly fitted with no damage

    cab: nothing changes when i take them out! should i try running without them fitted?

    March 11, 2007 at 9:46 am #207313
    cab
    Participant

    Re: Zanussi DW908

    no when you remove the tubes if water runs out of them it means the sump is blocked, on experience, there is a 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} chance that flushing the sump doesnt clear it and the only thing to do is replace it.

    cab

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.