help – smeg wd16ba – washer/dryer

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › help – smeg wd16ba – washer/dryer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 11, 2007 at 1:44 pm #25760
    shaun2812
    Participant

    Hello, im new to this website so please bare with me. Can anyone help me with my Smeg wd16ba washer/dryer. It does not seem to warm up when on the drying cycle. I am aware that there is a temprature dial which has been set to 90o and it still does not warm up. I have had the unit for three years and it has not warmed up since bought from new. Is there something I am failing to do which is simple e.g. opening a valve/turning a key. Please help …………….
    Shaun

    March 11, 2007 at 9:21 pm #207502
    Penguin45
    Participant

    Re: help – smeg wd16ba – washer/dryer

    Temperature knob is for wash temperatures only…….. You should only need to set the drying time and it’ll do it from there.

    Penguin45.

    March 12, 2007 at 11:21 am #207503
    shaun2812
    Participant

    Re: help – smeg wd16ba – washer/dryer

    Thanks for your reply. Ive looked through the advice/instructions you forwarded and seem to be doing everything correctly. The machine does activate the drying program selected and tumble the minimal load within however on completion the load is still wet and cold indicating that no warm/hot air has circulated. |During the cycle i can hear air being circulated which must be cold so do you have any ideas why this may be so ?
    I noted from the notes that in the trouble shooting questions specific to laundry not drying it mentions ensuring that the water tap is open. Could this be my problem and if so where is it and is it easy to do ?
    Thanks for your time
    Shaun

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.