whirlpool commercial dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool commercial dryer

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • March 12, 2007 at 11:33 am #25775
    petalpop
    Participant

    been to above machine model 3rleq8000kq1 which is no-go,
    power through timer and on/off push switch + door switch ok
    anybody got any ideas please

    March 12, 2007 at 11:53 am #207544
    ali-p
    Participant

    Re: whirlpool commercial dryer

    CHECK FOR IN LINE FUSE ‘HIDDEN’ IN LOOM RUNNING ALONG INSIDE TOP OF CABINET – 6.3 AMP, 20mm

    GOOD LUCK!

    March 12, 2007 at 12:24 pm #207545
    petalpop
    Participant

    Re: whirlpool commercial dryer

    cheers for that
    i will check it out

    March 12, 2007 at 4:51 pm #207546
    DentedPorsche
    Participant

    Re: whirlpool commercial dryer

    Bottom of machine, just behind the ducting at the front there’s a thermal fuse (481925228115 , although most likely superseded by now). Check that out.
    As far as I remember there isn’t an inline fuse in the control panel of the dryers, only the washing machines.

    Brian

    March 12, 2007 at 7:52 pm #207547
    petalpop
    Participant

    Re: whirlpool commercial dryer

    cheers i will try and find it tomorrow

    March 13, 2007 at 2:24 pm #207548
    petalpop
    Participant

    Re: whirlpool commercial dryer

    you were right brian
    but next to it there is a thermostat and i can only get a circuit through 2 of the 4 wires
    any idea of a part number for that please

    March 13, 2007 at 9:26 pm #207549
    DentedPorsche
    Participant

    Re: whirlpool commercial dryer

    Part number is 481928248311. Again, this may be superseded to a new number.

    Brian

    March 13, 2007 at 9:52 pm #207550
    EFS
    Participant

    Re: whirlpool commercial dryer

    The thermostat you are looking at should show continuity through the large connections and the smaller connections should read approx 28K.
    This is a heating resistance which comes on when the low temp option is switched on and makes the thermostat operate at a lower heat.

    Steve

    March 14, 2007 at 10:40 am #207551
    petalpop
    Participant

    Re: whirlpool commercial dryer

    thanks brian (number is current)
    i will check that resistance steve thanks for the heads up

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.