BOSCH WFR2866GB/01???

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BOSCH WFR2866GB/01???

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • March 14, 2007 at 5:42 pm #25843
    S1MON
    Participant

    Went too this m/c and it had no display present, power was getting there. When you close the door and turn the control knob nothing is lighting up and the door lock is not engaging.

    I have replaced the main board and the display and it has had no difference at all. I have checked the usual things motor is fine etc…….. Wiring is ok. I have got voltage going to the module from the suppressor.

    Any ideas im scratching my head here 😥

    March 14, 2007 at 7:13 pm #207814
    timdowning
    Participant

    Re: BOSCH WFR2866GB/01???

    Are you sure the wiring connections haven’t been tampered with?

    Have you tried a different wall socket?

    March 14, 2007 at 7:16 pm #207815
    S1MON
    Participant

    Re: BOSCH WFR2866GB/01???

    yer tried two different sockets getting 240 at the supressor

    March 14, 2007 at 7:24 pm #207816
    gegsy
    Participant

    Re: BOSCH WFR2866GB/01???

    Have you looked at the mains supressor 😕

    Greg

    March 14, 2007 at 7:27 pm #207817
    S1MON
    Participant

    Re: BOSCH WFR2866GB/01???

    yer ive check it it looks fine, in get 240v from there to the board

    March 14, 2007 at 7:30 pm #207818
    gegsy
    Participant

    Re: BOSCH WFR2866GB/01???

    OK
    You did check for cracks? don’t be fooled by 240v out of it, when push comes to shove there is no current when this faults, under load.
    Will do a bit of lookin for you and report back 😀

    Greg

    March 14, 2007 at 7:33 pm #207819
    S1MON
    Participant

    Re: BOSCH WFR2866GB/01???

    cheers, ill recheck…….

    March 14, 2007 at 7:41 pm #207820
    gegsy
    Participant

    Re: BOSCH WFR2866GB/01???

    Ok Simon
    If any component has a short circuit or earth fault, the display will either go dark or have no function.
    Basically check components (heater first 😉 ) in turn,. replace as required.

    Greg

    March 14, 2007 at 10:31 pm #207821
    S1MON
    Participant

    Re: BOSCH WFR2866GB/01???

    ok ill have a look tomorrow see what i come back with….

    March 17, 2007 at 5:26 pm #207822
    S1MON
    Participant

    Re: BOSCH WFR2866GB/01???

    Got it sorted found the flow sensor was at fault. Tried the old board but that was coming up in German, configured the new one and now it is running great.

    Cheers Gegsy

    March 17, 2007 at 5:41 pm #207823
    gegsy
    Participant

    Re: BOSCH WFR2866GB/01???

    Excellent :tup:

    Greg

    March 17, 2007 at 7:17 pm #207824
    S1MON
    Participant

    Re: BOSCH WFR2866GB/01???

    😛

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.