WDJ 1294 – program selector advancing

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › WDJ 1294 – program selector advancing

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 17, 2007 at 11:33 am #25913
    fclauson
    Participant

    Hi

    I have a WDJ1294 – 10 years old but done excellant service

    It has the advancing program selector problem (clicking around)

    I have already changed the brushes as I had a problem where the drum no longer span up to full speed to dry stuff off. I have also checked the tacho fittment (but not tested it with a meter to verify a connection)

    The unit fills with water then turns once – obviously discovers some fault and then moves the timer around to drain (Q)

    I need ideas – I am suspecting the motor controller (but they are expensive) so want to validate if there is anything else worth checking before I make that pro-engineer-mend or chuck decision


    Francis

    March 17, 2007 at 12:22 pm #208095
    fclauson
    Participant

    Re: WDJ 1294 – program selector advancing

    Have now checked tacho with neighbours meter – seems to be ok

    Check out this photo of circuit

    I think the large resitor bottom right is burt out – its a bit black and I can no longer make out the colours – does anyone know what value this should be

    Francis

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.