Slimline Philco

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Slimline Philco

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • March 21, 2007 at 12:23 pm #26024
    iadom
    Moderator

    Model. Ecotronic WD2003SL PFFS93490284.

    Motor is shot. Anyone know of cost/availability?


    Jim.

    March 21, 2007 at 12:28 pm #208486
    gegsy
    Participant

    Re: Slimline Philco

    Hi Jim
    Connect show motor PHL116190214 – £77.31 + costs
    With a foot note

    Ref metz and siemens type motors. These motors are no longer available you must use the indesco motor. On all these older models you will need to replace the module and the interface. Please see your supervisor for the correct part listings that you will need.

    HTH

    Greg

    March 21, 2007 at 12:39 pm #208487
    iadom
    Moderator

    Re: Slimline Philco

    Cheers Greg, now tell me how I am going to explain that to a man of arab extraction who only speaks French. 😀

    Jim.

    PS. Is there any way to tell without going back which motor it had, it was mounted inside a square metal case with an arm of the case seemingly fitted to one of the suspension bolts. 😯

    March 21, 2007 at 12:46 pm #208488
    gegsy
    Participant

    Re: Slimline Philco

    iadom wrote:PS. Is there any way to tell without going back which motor it had, it was mounted inside a square metal case with an arm of the case seemingly fitted to one of the suspension bolts. 😯

    I would stake money on it being a Metz 8)
    Only sure way would be to remove casing and motor. Loosen bolt of suspension leg, that arm should be just cupped in there 😀

    Greg

    PS- As for Arab explanation, vous sur votre propre là-bas dans la merde 😆

    March 21, 2007 at 1:25 pm #208489
    iadom
    Moderator

    Re: Slimline Philco

    I preferred my,” le moteur est mort”, the best I could manage only having done 18 months French lessons almost 45 years ago. 😀

    Jim.

    March 22, 2007 at 7:43 pm #208490
    eastlmark
    Moderator

    Re: Slimline Philco

    Yep the Metz motor was the square one. forget it, the kits were next to useless.

    March 22, 2007 at 7:45 pm #208491
    eastlmark
    Moderator

    Re: Slimline Philco

    iadom wrote:Cheers Greg, now tell me how I am going to explain that to a man of arab extraction who only speaks French. 😀

    Jim.

    Référence Metz et type moteurs de Siemens. Ces moteurs sont plus disponibles vous doivent n’utiliser le moteur d’indesco. Sur tous ces modèles plus anciens vous devrez remplacer le module et l’interface. Veuillez voir le votre surveillant pour les listes correctes de partie des lesquelles vous aurez besoin.

    March 22, 2007 at 8:22 pm #208492
    iadom
    Moderator

    Re: Slimline Philco

    What he said… 😆

    Jim.

    March 22, 2007 at 10:03 pm #208493
    gegsy
    Participant

    Re: Slimline Philco

    iadom wrote:What he said… 😆

    Je ne vous connais pas le supporter d’une équipe trichante de football 😉 😆

    Greg

    March 22, 2007 at 10:56 pm #208494
    iadom
    Moderator

    Re: Slimline Philco

    gegsy wrote:

    Je ne vous connais pas le supporter d’une équipe trichante de football 😉 😆

    Greg

    Two more French words for you, both signify footballing cheats, Pires & Henry, 😛

    March 22, 2007 at 10:58 pm #208495
    gegsy
    Participant

    Re: Slimline Philco

    :shutup: :look:

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.