fisher & paykel LW035-F fault code 00101011 (43)

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › fisher & paykel LW035-F fault code 00101011 (43)

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 1, 2007 at 10:41 pm #26310
    ccoutts
    Participant

    Hi there,

    I’m new to this forum, primarily because I just bought a Fisher & Paykel Smartdrive washing machine (model LW035-F ) which has a problem.

    It starts the wash cycle ok (I think) by intermitantly squirting water down on the clothes, then rotating the drum, and repeating. This happens for about 1 min, then it stops, beeps, and dislays an error code: 00101011 which equates to code 43.

    I live in NZ, so rang a company called Axial who are the primary technicians and spare parts dealer for F&P whiteware in NZ. They told me it was an “Out of Balance” switch.

    Can anyone please describe where this switch is located in my machine, so I can do the standard Kiwi thing and try to fix it myself. I’ve read this post: http://www.ukwhitegoods.co.uk/modules.p … c&p=126641 which describes a few potential problems with this switch.

    Thanks for any helps
    Chris

    April 2, 2007 at 12:13 am #209668
    Penguin45
    Participant

    Re: fisher & paykel LW035-F fault code 00101011 (43)

    43 is the OOB switch……… Top deck can be removed by undoing two screws at the back of the machine. OOB (and lid) switch both suffer from vibration and corrosion problems. You need to check function and integrity of the switch and wiring. While the top is off, ensure that the bias spring is connected to the tub in the front left corner. This prevents the tub riding against the lever. As you have recently bought it, I presume it will have been moved, so this is a distinct possibility.

    Regards,
    Penguin45.

    April 2, 2007 at 12:16 am #209669
    ccoutts
    Participant

    Re: fisher & paykel LW035-F fault code 00101011 (43)

    Thanks Penguin45, I hoped you’d reply, as from all the other posts you seem like the guy who knows stuff!

    Thanks for your description. I’ll check them out tonight.

    Cheers
    Chris

    April 2, 2007 at 12:51 am #209670
    ccoutts
    Participant

    Re: fisher & paykel LW035-F fault code 00101011 (43)

    BTW, heres a good link I found with the schematics of all these newish machines: http://www.stokes-aus.com.au/StokesAP/i … Dryers.asp

    March 5, 2008 at 12:07 pm #209671
    Jazz
    Participant

    Re: fisher & paykel LW035-F fault code 00101011 (43)

    Hey there,

    I tried to repair my switch. didnt work, so i just shorted (connected) the yellow and white wire from the switch and everything worked. No balance shut off. but if you need your machine this is a quick fix

    March 5, 2008 at 9:12 pm #209672
    Penguin45
    Participant

    Re: fisher & paykel LW035-F fault code 00101011 (43)

    Safety device – ensure that a new switch is installed at the earliest opportunity.

    Penguin45.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.