Diplomat APL8215/1 – no water feeding into machine.

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat APL8215/1 – no water feeding into machine.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 3, 2007 at 1:40 pm #26356
    Cobaltblue
    Participant

    Hi everyone

    This is the last ditch attempt before we buy a new machine.
    The problem is simple after the initial pumping out at the start of a program no water comes through. I’ve cleaned the filters at the mains connection and also at the solenoid end. I’ve checked the microswitch and float in the water matrix on the left side and the anti-flood switch in the base. No obvious blockages and the machine was recently cleaned.

    Any suggestions?

    Kind regards

    Peter 🙂

    April 3, 2007 at 7:33 pm #209820
    Penguin45
    Participant

    Re: Diplomat APL8215/1 – no water feeding into machine.

    Dead water valve? Solenoid coil may have failed. P/no 31X5926 if required – spares@ukwhitegoods.co.uk will get you one.

    Power off, if investigating.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.