Hoover HF7 130M is completely dead and will not start.

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hoover HF7 130M is completely dead and will not start.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 7, 2007 at 3:59 pm #26435
    scott5566
    Participant

    Hello could anybody shed some light on my problem,
    The washing machine has suddley stopped working , their was washing inside at the time , which I have removed.

    The thing is dead , I have checked fuses all seem fine , the door mechinism locks , but the soleniod water valves don’t seem to energise .

    Any tips for me to look at , or has anybody got a wiring diagram for me to follow ,( 😀 iam an electrical engineer so theirs no risk of electrocution, well not on this day anyway)

    Thanks in advance

    Scott

    April 7, 2007 at 5:52 pm #210162
    Penguin45
    Participant

    Re: Hoover HF7 130M is completely dead and will not start.

    Drain pump out of circuit will prevent the machine from filling. Nasty little Chinese timer/selector switch causes all sorts of problems. Computer boards die off for no apparent reason.

    Too many variables for any sort of exact diagnosis, I’m afraid.

    Regards,
    Penguin45.

    April 8, 2007 at 7:13 pm #210163
    scott5566
    Participant

    Re: Hoover HF7 130M is completely dead and will not start.

    OK well its a start , I will see if I can get somewhere with that , and hopefully have some better infomation to come back with.

    Thanks again

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.