Hoover HF7 130M is completely dead and will not start.

[scott5566]

Hello could anybody shed some light on my problem,
The washing machine has suddley stopped working , their was washing inside at the time , which I have removed.

The thing is dead , I have checked fuses all seem fine , the door mechinism locks , but the soleniod water valves don’t seem to energise .

Any tips for me to look at , or has anybody got a wiring diagram for me to follow ,( 😀 iam an electrical engineer so theirs no risk of electrocution, well not on this day anyway)

Thanks in advance

Scott

[Penguin45]

Re: Hoover HF7 130M is completely dead and will not start.

Drain pump out of circuit will prevent the machine from filling. Nasty little Chinese timer/selector switch causes all sorts of problems. Computer boards die off for no apparent reason.

Too many variables for any sort of exact diagnosis, I’m afraid.

Regards,
Penguin45.

[scott5566]

Re: Hoover HF7 130M is completely dead and will not start.

OK well its a start , I will see if I can get somewhere with that , and hopefully have some better infomation to come back with.

Thanks again

[Author]

Posts