Whirlpool DWF 405 Flashing LED…PLEASE HELP !!!

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool DWF 405 Flashing LED…PLEASE HELP !!!

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 11, 2007 at 9:43 am #26505
    BarnacleBill
    Participant

    Can anyone help please?

    We have a Whirlpool Dishwasher purchased from IKEA France in March 2003.
    The model No. DWF 405.
    It has developed a fault as follows:
    Machine starts on program 2 and pump runs for 30 seconds.
    Water enters machine and first cycle starts.
    At end of the cycle, pumps out and next cycle starts.
    Water starts to enter again but within a few seconds it pumps out and the green led starts flashing.
    The pump can be heard running for several seconds then machine stops completely.
    The flashing led has a 7 flash sequence.

    Very much appreciate any help!
    Thanks.

    April 11, 2007 at 11:32 pm #210408
    Penguin45
    Participant

    Re: Whirlpool DWF 405 Flashing LED…PLEASE HELP !!!

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=23436

    Penguin45.

    April 12, 2007 at 6:19 pm #210409
    BarnacleBill
    Participant

    Many thanks Penguin45 for your response.
    I took off the left hand panel, found what I hope was the matrix sensor, the contacs looked clean but I gently squeezed them closed a bit.
    MAGIC …t went through a complete cycle..no flashing led’s..really hope thats fixed it.
    many many thanks for your help!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.