- This topic has 6 replies, 3 voices, and was last updated 18 years, 12 months ago by
.
-
Posts
-
Customer just phoned, neon 4 flashing, supposed to be door lock fault but he says door is locking, I may be imagining it but I seem to remember someone having this fault and it was the fill valve that was OC.
Was it just a dream ( nightmare more likely ) or can a duff fill valve throw up F17?
Jim.
Re: Indesit possible F17 fault
not sure if f17 is a fault
anyway.. if the doors locking and the machine aint starting, its usually the brushes to be fair, but ive had faulty valves, even the board burning on the valve connection
so, as ever with indesit… could be just about anything 😆
Re: Indesit possible F17 fault
Neon four flashing on its own apparently, says it starts to fill for a couple of seconds then goes dead with neon flashing. Although it also could be a triac fault according to the error codes. 😥
Only 14 months old, will take a look on Wednesday.
Jim.
Re: Indesit possible F17 fault
led 4 flashing is a triac failure, will fill for few seconds then do system check, pick up the triac fault and flash no4, sorry, looks like another great module bit the dust
- You must be logged in to reply to this topic.