WMA60P Throwing belt off

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WMA60P Throwing belt off

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • April 17, 2007 at 3:26 pm #26675
    admin
    Keymaster

    Went to a WMA60P today which keeps throwing the belt
    off for no apparent reason. I have fitted new belts on 2 other occasions
    but usually have to go back every 6 months or so to refit…
    whilst I dont mind its a nice little earner I was wondering if there is
    something im missing…..bearings seem fine and no movement in
    drum I can tell….only difference is that it has a plastic pulley?

    Any ideas Cheers Col

    April 17, 2007 at 6:31 pm #211007
    indespoint
    Participant

    Re: WMA60P Throwing belt off

    If belt and bearings are ok id go for the pulley itself

    April 17, 2007 at 7:05 pm #211008
    admin
    Keymaster

    Re: WMA60P Throwing belt off

    Sorry didnt mention but pulley seems fine as far as I
    can tell…..no access to it from the back but
    if I tap it with a screwdriver it rings ok…if that makes
    sense as its not metal!!! but no thud sound as if
    cracked or something!!!!!

    April 17, 2007 at 8:38 pm #211009
    recall
    Participant

    Re: WMA60P Throwing belt off

    If pulley had gone it would throw it after 2 loads and sound horendous (i think that how you spell it? 🙂 ) on spin. Last ones ive seen you would feel by hand easily

    April 17, 2007 at 9:47 pm #211010
    iadom
    Moderator

    Re: WMA60P Throwing belt off

    recall wrote:and sound horendous (i think that how you spell it? 🙂 )

    Not quite 😉 If you use Internet Explorer 7 then why not download this little utility. http://www.iespell.com/

    You can use it for all on line postings. It now works via the right click menu, type your post, highlight everything, right click, select ‘Check Spelling’ . Make sure you alter the default language settings from English US to English UK.

    Jim.

    PS. ‘horrendous’ was the only one it spotted in this post. 8)

    April 18, 2007 at 8:27 pm #211011
    recall
    Participant

    Re: WMA60P Throwing belt off

    cheers for that one. il have a go.

    April 23, 2007 at 8:13 am #211012
    mvitorio
    Participant

    Re: WMA60P Throwing belt off

    I had one once that had cracked the front single motor mount bracket on the tub. All appeared ok until it had a load in which caused motor to flap and throw belt off.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.