Zanussi ZWD1472S – Error code E10

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi ZWD1472S – Error code E10

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 26, 2007 at 9:14 am #26905
    stanners1980
    Participant

    Hi all,

    Have just started to use our new Zanussi washer/dryer. Every wash so far has been interrupted with beeping and an E10 error code on the display. 🙁

    Manual says there may be a problem with the inlet hose, but I’ve checked for kinks etc and can’t see anything obvious. The supply tap is fully open also. The wash completes ok if I clear the fault by pressing the start button.

    Can anyone suggest anything else worth checking before I give the service centre a call?

    Many thanks,


    Stanners

    April 26, 2007 at 4:55 pm #211839
    helo_75
    Participant

    Re: Zanussi ZWD1472S – Error code E10

    change the 3 way valve, it aint taking water in on the dry cycle

    for reference, if you take the lid off the machine, its the green one

    April 26, 2007 at 6:18 pm #211840
    suedehead1
    Participant

    Re: Zanussi ZWD1472S – Error code E10

    if its new you would be better phoning zanussi.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.