Hotpoint WF340 no go

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF340 no go

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 26, 2007 at 11:44 am #26908
    Seamy
    Participant

    Year old Hotpoint WF340 vogue cold fill version 4 washing machine. When you select programme it locks door although door locked LED does’nt light up, programme status LED comes on, eg,, wash, spin if spin programme selected. Then nothing, i’ve tried new door interlock but no different. Is there a way of resetting those Indesh1t modules?

    April 26, 2007 at 4:47 pm #211844
    helo_75
    Participant

    Re: Hotpoint WF340 no go

    i think ull find the motors faulty m8

    either the brushes or the motor itself

    April 26, 2007 at 4:58 pm #211845
    Seamy
    Participant

    Re: Hotpoint WF340 no go

    OK i’ll have a look, thanks

    April 26, 2007 at 4:59 pm #211846
    robbo1973
    Participant

    Re: Hotpoint WF340 no go

    i had this last week and it was a broken wire on the motor plug.

    April 27, 2007 at 1:44 pm #211847
    Seamy
    Participant

    Re: Hotpoint WF340 no go

    Yeah, that was it, dodgy motor. Open circuit coil. pitted armature also, motor seems to have bad bearing as it catches in one position when you turn it by hand, this machine was brand new & used once or twice in a rented accomodation, failed & landlord never bothered about it & its now over a year old…

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.