BEKO WMA 1715S

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BEKO WMA 1715S

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 2, 2007 at 5:01 pm #27077
    PGS
    Participant

    Hi guys has anyone any idea what fault would cause the pre wash nean to flash constantly on above M/C and how do i clear it. The customer said it took ages before she could open the door. No progamming of m/c is now possible cheers Paul.

    May 2, 2007 at 5:54 pm #212502
    PGS
    Participant

    Re: BEKO WMA 171SS

    Its ok guys ive found info in another post thanks anyway paul.

    May 2, 2007 at 5:55 pm #212503
    tanner
    Participant

    Re: BEKO WMA 171SS

    if its one of the new ones it is stuck in fault code the only way of resetting the memory is to unplug for a couple of days that sometime works i know that service force replace the board if this happens.
    good luck

    stuart

    May 3, 2007 at 7:12 am #212504
    Alanj
    Participant

    Re: BEKO WMA 1715S

    Paul,
    just as a matter of interest, was it the motor plug / wiring. 😆
    Alan

    May 3, 2007 at 7:47 am #212505
    Lawrence
    Participant

    Re: BEKO WMA 1715S

    I did the other post,went and reset but found no motor action -PCB blown .
    It seems they don’t do a fault code for a MOUSE in the motor 😯 ,trapped between the comm and the frame shorted everything out.
    L

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.