- This topic has 11 replies, 5 voices, and was last updated 18 years, 11 months ago by
.
-
Posts
-
hi all aint got the model number at hand it is the fully dig with display like iz.
fault reported not washing properly ran thru test and the jet system was not firing water fully across the drum it was hitting door glass and runnig down. checked pump fine but manifold was clogged so changed but still the same.ran thrui test again and code e41 door aperture at fault ❓ what does this mean and how does it detect it :rolls:.
thanx in advance.Re: e41 fault on zan w/dryer
someone would have tried to start a program without shutting the door
since this would be the last recognised fault, it’ll stay there till its cleared
might not help you with your present fault!!
E10
=water supply problem.Could be a number of things
Taps not on
Kinks in inlet pipes
Filters blocked at water valves
Water valve not operating
Blocked pressure chamber
Faulty pressure switch
Or even a pcb fault
The list is quite endless lolRichard
Re: e41 fault on zan w/dryer
Thread title says so…… Model number would have been nice. You thinking dryer valve solenoid?
Chris.
Re: e41 fault on zan w/dryer
hi got model no wjd1667w.the main fault was not washing clothes the circ pump runs fine no blockages but the water hits the door glass and runs round instead of firing at clothes so not cleaning clothes properly what else would cause this. now it is also coming up e10. thanx for replies.
Re: e41 fault on zan w/dryer
checked for coin and changed manifold anyway as full of smelly crap lovely.
blew down pipe and clear but hits door glass.Re: e41 fault on zan w/dryer
i can understand yhe e10 fault solved by a solenois valve but the problem of the pump ❓
- You must be logged in to reply to this topic.