- This topic has 6 replies, 3 voices, and was last updated 18 years, 11 months ago by
.
-
Posts
-
I went to a Hotpoint WF540 this morning, took 15 hair grips from pump filter.
This is the first one I have seen with the Indesit type pump set up, the pump is front mounted, behind facia on the right with the bog standard Indesit pump & unscrewable filter. The motor is mounted to the left of the drum looking from the front, it does mean that access the main PCB is much better.
I have been having a look on Partfinder and cannot see this set up in the WF540 list? I don’t have the commercial code to hand, perhaps that would shed some light.
Jim.
Re: Hotpoint WF540 new pump set up.
hi, there are 2 different models the WF540SC (screwed tub) & WF540WE (welded tub) bit of a pain when ordering as if you pick the wrong one all the pasrts are different
Re: Hotpoint WF540 new pump set up.
Yes, but none of them appear to show this later pump set up. 😕
Oops, just found them. 😳
Jim.Re: Hotpoint WF540 new pump set up.
if u lookk at the wf321.. thats the new set up, should help with diagram, theyre all coming now with the pumps at the front, which is good news, u dont have to empty a machine full of water on the floor to empty the pump nemore!!!
Re: Hotpoint WF540 new pump set up.
I think the access to the PCB with the motor shifted to the other side is a huge bonus.
Jim.
Re: Hotpoint WF540 new pump set up.
yep, thats true, however ive struggled to pull out several machines to clear blockages only to find i didnt need to as the pump is at the front, how to makeyourself look a fool!!
- You must be logged in to reply to this topic.