Hotpoint WMT03

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint WMT03

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • May 18, 2007 at 5:40 pm #27452
    Latinlover
    Participant

    Hi guys, My 3 year old Hotpoint WMT03 has suddenly decided to pump the water out as quick s it is filled, plus it just sloshes about without getting on with the job, then it just refuses to spin on any cycle. HELP the kids are fed up with their dirty clothes.

    May 18, 2007 at 5:45 pm #214120
    helo_75
    Participant

    Re: Hotpoint WMT03

    is it pumping, or syphoning?

    got any flashing lights?

    could be anything, some more info would be helpful?

    May 18, 2007 at 5:56 pm #214121
    Latinlover
    Participant

    Re: Hotpoint WMT03

    It is pumping all the time, and at every pump (ie every 2 seconds) the reset button flashes. It is the same on every programme, plus it does not do a spin, only sloshes about 🙁

    May 18, 2007 at 7:09 pm #214122
    timdowning
    Participant

    Re: Hotpoint WMT03

    Try draining off the water into a bowl.

    Select spin.

    Does it now spin??? (it does take a while to get into the full spin cycle)

    May 18, 2007 at 8:43 pm #214123
    Penguin45
    Participant

    Re: Hotpoint WMT03

    If it is pumping all the time, either the flood protection level on the pressure switch is jammed on, or you have a failure on the computer board.

    Regards,
    Penguin45.

    May 18, 2007 at 9:07 pm #214124
    hotpnt
    Participant

    Re: Hotpoint WMT03

    could be a pressure hose/sump blokage causing just a small amount of water to operate the overfill level?

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.