AEG “Clicking” washer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG “Clicking” washer

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 23, 2007 at 12:58 pm #27566
    trotter
    Participant

    Any help please………called out to an aeg washing machine, not filling & making load clicking noise. I see there is a device connected to the solenoid with some plastic cogs inside!

    I am guessing that this is to move a flap in order to direct the water to the right part of the dispensor – the cogs are intact, so is it likely that the “Flap is jammed?

    Any help gratefuly receivd as ever
    🙂

    Model number to follow!!!

    May 23, 2007 at 1:50 pm #214711
    Bryan
    Participant

    Re: AEG “Clicking” washer

    Water Distributor (top of soap box etc) has to be replaced as a complete unit. About £35+vat trade from memory. You’ll get the part from any supplier once you get the model no.

    Bryan

    May 24, 2007 at 9:51 pm #214712
    electrofix
    Moderator

    Re: AEG “Clicking” washer

    agree had this fault a few times very common

    Dave

    May 24, 2007 at 11:14 pm #214713
    Penguin45
    Participant

    Re: AEG “Clicking” washer

    Make sure you order on the pnc – there are two different ones – two connector blocks and three.

    Chris.

    May 25, 2007 at 6:21 am #214714
    Lawrence
    Participant

    Re: AEG “Clicking” washer

    Penguin45 wrote:Make sure you order on the pnc – there are two different ones – two connector blocks and three.

    I got caught by that once 🙁 I have done loads of these must be the hard water in my area or something .
    Lawrence

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.