Zanussi FLE1416 Blank module program code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi FLE1416 Blank module program code

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 24, 2007 at 3:36 pm #27589
    yorkshireracer
    Participant

    I have the above model which needs a new module. I have fitted these blank modules before so am aware of the programming sequence. The problem I have is the info I have is for the models with a digi display(ie jetsytem) The fle is an aquacycle so no display to view the code as you input it. I can see that obviously the option lights are used to represent the digits of the code. Does anyone have the key for corresponding the lights to the correct digits required???

    May 24, 2007 at 5:18 pm #214804
    Martin114
    Participant

    Re: Zanussi FLE1416 Blank module program code

    hi, I am prety sure there is a problem with configuring these boards due to a software error.
    The solution is to fit a pre-configured board part no. 348 29 32-60/9

    Hope this helps

    May 25, 2007 at 8:14 pm #214805
    comptonappliances
    Participant

    Re: Zanussi FLE1416 Blank module program code

    binary codes lights from top 0=8
    0=4
    0=2 program code
    0=1

    0=8
    0=4
    0=2 position for program code
    0=1
    for example top set lights for program code top light and bottom light lit is equivalent to 9 on digital display and 2nd and 3rd light down would =6 etc
    obviouly binary only goes 0-9 so A=10 B=11 C=12 D=13 E=14 F=15
    so for example code F would be all four top lights lit—-8+4+2+1=15
    confusing i know but hope it helps

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.