Zanussi FLE1416 Blank module program code

[yorkshireracer]

I have the above model which needs a new module. I have fitted these blank modules before so am aware of the programming sequence. The problem I have is the info I have is for the models with a digi display(ie jetsytem) The fle is an aquacycle so no display to view the code as you input it. I can see that obviously the option lights are used to represent the digits of the code. Does anyone have the key for corresponding the lights to the correct digits required???

[Martin114]

Re: Zanussi FLE1416 Blank module program code

hi, I am prety sure there is a problem with configuring these boards due to a software error.
The solution is to fit a pre-configured board part no. 348 29 32-60/9

Hope this helps

[comptonappliances]

Re: Zanussi FLE1416 Blank module program code

binary codes lights from top 0=8
0=4
0=2 program code
0=1

0=8
0=4
0=2 position for program code
0=1
for example top set lights for program code top light and bottom light lit is equivalent to 9 on digital display and 2nd and 3rd light down would =6 etc
obviouly binary only goes 0-9 so A=10 B=11 C=12 D=13 E=14 F=15
so for example code F would be all four top lights lit—-8+4+2+1=15
confusing i know but hope it helps

[Author]

Posts