Whirlpool G2PDWI/1WH Error Code

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool G2PDWI/1WH Error Code

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 25, 2007 at 10:33 pm #27641
    kevin.mawhinney@lineone.n
    Participant

    Does anyone know what 6 flashes mean?
    On startup the machine fills with water but then the error led starts flashing.

    May 25, 2007 at 10:35 pm #214975
    gegsy
    Participant

    Re: Whirlpool G2PDWI/1WH Error Code

    kevin.mawhinney@lineone.n wrote:Does anyone know what 6 flashes mean?

    Possibly one of these – a defective flow meter,kinked fill hose,water tap off or low water pressure.

    Greg

    May 30, 2007 at 8:53 pm #214976
    kevin.mawhinney@lineone.n
    Participant

    Re: Whirlpool G2PDWI/1WH Error Code

    Plenty of water flowing in and the machine fills OK. Where is the flowmeter and how does it work?

    May 30, 2007 at 9:32 pm #214977
    gegsy
    Participant

    Re: Whirlpool G2PDWI/1WH Error Code

    Hi
    If you remove the l/h side panel of appliance you will find the water matrix. On the bottom left of it is the flowmeter. Unfortunately the flowmeter comes with the water matrix, bummer 😥
    Unplug appliance before attempting this :plug:

    Greg

    June 4, 2007 at 8:20 am #214978
    kevin.mawhinney@lineone.n
    Participant

    Re: Whirlpool G2PDWI/1WH Error Code

    Hi Greg – Thanks for the info. I’ll have a look – Kevin.

    June 8, 2007 at 10:54 pm #214979
    kevin.mawhinney@lineone.n
    Participant

    Re: Whirlpool G2PDWI/1WH Error Code

    Hi Greg – I had a look at the water matrix and found that the flowmeter is indeed faulty. It has a crack in the glass reed switch which picks up the magnetic pulses from the impeller. It’s not responding when the impeller turns. Do you know if the reed switch, or its small circuit board are available separately from the matrix? If not, is the matrix available?
    Thanks for your help – Kevin.

    June 8, 2007 at 11:09 pm #214980
    gegsy
    Participant

    Re: Whirlpool G2PDWI/1WH Error Code

    Hi
    There is a kit that has two reed relay PCB’s in it (you choose the one you have fitted) part no 4812 310 19147.
    This kit is available from spares@ukwhitegoods.co.uk

    Greg

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.