Hotpoint BFI620 intergrated dishwasher heater fault?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint BFI620 intergrated dishwasher heater fault?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 16, 2007 at 10:00 am #28182
    whiskeyjack6058
    Participant

    Went to one of these evil things the other day. After about 2 mins washing at the begining of the cycle, it pumps out then LED’s 2 & 4 begin to flash. I understand this error code indicates a heater fault. I have tested the heater for resistance, and used a Mega to check for for earth leakage and all checks fine. Perhaps this could be the module that is faulty??? Considering that the dishwasher has allready had a new heater fitted by hotpoint and numerous other repairs, my thoughts point towards the PCB. Any ideas?
    Thank you
    Regards

    Rob.

    June 16, 2007 at 12:02 pm #217268
    smartin
    Participant

    Re: Hotpoint BFI620 intergrated dishwasher heater fault?

    is it a chinese d/w if it is some have cut out stat underneath on the left hand side rear or if not could be group of stats underneath between sump and salt chamber hope this helps smartin

    June 16, 2007 at 5:25 pm #217269
    iadom
    Moderator

    Re: Hotpoint BFI620 intergrated dishwasher heater fault?

    Hotpoint don’t use Chinese produced machines ( not yet anyway 😥 ) although it is 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} Indesit, no cut outs AFAIK on these so module is a possibility, not the cheap module on these though, around £41 ex vat list price.

    Jim.

    June 16, 2007 at 5:30 pm #217270
    senseib
    Participant

    Re: Hotpoint BFI620 intergrated dishwasher heater fault?

    Often on hotpoint d/w pcb’s there is a dry joint at the heater connection.
    Just resolder and this cures the problem. hope this helps.
    brian.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.