Ariston Nightmare

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Ariston Nightmare

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • June 16, 2007 at 1:07 pm #28187
    mentalmummy
    Participant

    :rolls:
    Hello I hope you can help me. Have had really good advice in the past.
    My Ariston washing machine stopped during a program and had lights flashing I think three on each side and I was unable to open the door.

    I tried a quick 30 min wash to see – I know..impatient! – and it started to fill then stopped again. It won’t drain, it won’t spin. I have managed to open the door by unplugging at the mains – along with all the water !! – and have emptied the load – which was quite heavy – towels bath mats etc – tried to drain again but no joy. It clicks on like it will drain and just does nothing. All pipes seem clear of blockage – any advice would be gratefully recieved – 4 kids and a weeks worth of school uniform to wash !!
    Cheers Tracy.

    June 16, 2007 at 1:15 pm #217287
    mentalmummy
    Participant

    Re: Ariston Nightmare

    Sorry me again – forgot say it is an Ariston A1636 and now just two lights flashing and the on/off button. Cheers, T.

    June 16, 2007 at 1:23 pm #217288
    helo_75
    Participant

    which 2?

    if you count, obiously light1 is 1, 2 is two, etc

    which 2 are flashing (i.e 1+2 3+4 1+4 etc)

    thats the fault code

    thanx

    June 16, 2007 at 1:26 pm #217289
    mentalmummy
    Participant

    Re: Ariston Nightmare

    Hiya – Thanks for the reply. It’s lights 2 and 4 – this probably means I do too much washing and its had enough !!

    Thanks again,
    Tracy.

    June 16, 2007 at 1:38 pm #217290
    helo_75
    Participant

    f05 – pressure switch stuck on full

    this could be quite a few things

    1st of all, the pressure switch could be faulty
    the pipe from the switch to the pressure bottle could be damaged/kinked
    the pressure bottle itself could be clogged up with gunge

    failing that, its the pcb!! (which will require a new eprom as well)

    PLUG OUT if your gonna check it yourself!!

    hope this helps

    June 16, 2007 at 6:44 pm #217291
    hotpnt
    Participant

    Re: Ariston Nightmare

    hi, b4 you go too deep, if you were washing bath mats were they the rubber backed type? as it sounds like pump is blocked somewhere as you say it would not empty at all

    June 16, 2007 at 9:50 pm #217292
    indespoint
    Participant

    Re: Ariston Nightmare

    Come on guys the hint was it doesnt drain. The pump is bound to be jammed hence the flashing lights no matter which ones are flashing.

    Best way to deal with it is to get your hubby to pull machine out get drain hose into a bucket and allow it to drain through gravity. Once you’ve got all the water out you can open door without flooding kitchen and remove clothes.

    June 16, 2007 at 9:54 pm #217293
    hotpnt
    Participant

    Re: Ariston Nightmare

    hi inde thats what i was trying to politely say 😆

    June 16, 2007 at 11:41 pm #217294
    Penguin45
    Participant

    Re: Ariston Nightmare

    This is a Hotpoint/Indesit hybrid machine. There will be a filter in the sump hose connecting the drum and the pump. Remove rear lower cover for access. Power off, of course.

    Penguin45.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.