Indesit d/w IDL 715

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit d/w IDL 715

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 6, 2007 at 10:06 pm #28794
    reaper
    Participant

    Just a query on the purpose of the device clipped next to the dispenser-the one attached by two black wires to the programme module.Is it a safety stat,why do we get a new one c/w with new module – do they go faulty and if they do what symptoms/fault codes do we get.

    July 6, 2007 at 10:29 pm #220144
    iadom
    Moderator

    Re: Indesit d/w IDL 715

    It is the NTC or temp sensor, this module is very prone to failure but most varients are quite cheap, comes complete with new ntc attached.

    No IDL715 listed on Partfinder though. 😕

    Jim.

    July 7, 2007 at 2:02 pm #220145
    reaper
    Participant

    Re: Indesit d/w IDL 715

    Just fitted a new module on this c/w this device – the old one had a no heat fault.Theres a stat at the bottom as well under the heater is this just a cut out? Just trying to add to my knowledge which is rather meagre on dishwashers.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.