Miele T220 dryer seal

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele T220 dryer seal

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 10, 2007 at 7:23 pm #28897
    Simon46
    Participant

    How do i fit this seal 5860450? does the seal fit between the cabinet(stripdown) or just push in to a groove? Never repaired A Miele before.

    Regards
    Simon

    July 11, 2007 at 8:11 am #220573
    Seamy
    Participant

    Re: Miele T220 dryer seal

    Just pushes into a groove when front is off..

    July 11, 2007 at 9:24 am #220574
    Simon46
    Participant

    Re: Miele T220 dryer seal

    Thanks Seamy. Is there any hidden screws to remove front?

    S.

    July 11, 2007 at 11:50 am #220575
    Seamy
    Participant

    Re: Miele T220 dryer seal

    Yeah theres two hidden beneath plinth..
    This should guide you:-

    Open the door..
    Remove screws from the interlock..
    Remove screws around the door opening..
    Remove the screw caps from plinth..
    Remove plinth fixing screws..
    Slide plinth slightly to left to unclip & remove it..
    Remove 2 screws from bottom edge of front panel..
    Now pull front panel out at the bottom & release it from under facia..

    July 11, 2007 at 12:14 pm #220576
    Simon46
    Participant

    Re: Miele T220 dryer seal

    Thank you so much. I really appreciate this. 😀

    S.

    July 15, 2007 at 8:41 am #220577
    Simon46
    Participant

    Re: Miele T220 dryer seal

    After all that the new seal just pushes in to a groove if you open the door 😆
    Part no is superceded though.

    Thanks all
    S.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.