- This topic has 9 replies, 5 voices, and was last updated 18 years, 9 months ago by
.
-
Posts
-
Hi guys, got a bosch classixx 1200 washing machine which I have owned for a couple of years, machine gets worked fairly hard two three washes per day. Wife’s been happy with it until it started to continually take in water, seems to over fill slightly but go’s through its cycle until spin cycle then it stops. We can make it spin the cloths by selecting the spin cycle. This machine has a led display that normally counts down to zero when washing, I’ve noticed this has been erratic and is changing up and down. Is this the programmer at fault or could some other fault cause these symptoms, I’ve cleaned out the water pump filter, which was reasonably clean. 😯
Ok martin the number is
wr02466gb/07 fd8411617118
hope this helps,
the machine seems to be doing the same thing on all types of washes and settings 🙁Re: Bosch 1200 Classixx
WFO2466GB/07, I think you’ll find.
I suspect that you have a problem with the water level control system. This works by the displacement of air from a collecting bell attached to the bottom hose of the machine. The air is forced up a skinny hose, into a diaphragm switch at the top. The collecting bell can become blocked by sludge, the air hose can chafe through, or the switch can become faulty.
Switch is p/no 172693 if that proves to be the fault; spares@ukwhitegoods.co.uk will get you promptly.
Stay safe, power off at all times.
Regards,
Penguin45.Thanks for the info, I ve checked the hose and bell, all looks to be in good condition, switch seems to click when pressure put through the hose. hose is clear not blocked, should i try a new switch or is there a way of testing it. i have a meter. water continues to enter machine write through the cycle.seems to be rinsing constantly. Any idea’s appreciated.
Re: Bosch 1200 Classixx
Hi
With the power off, take the feed wires off each valve in turn, then set on spin and see if you still get the same symptoms.Greg
Re: Bosch 1200 Classixx
jimmyp wrote:Hi guys, got a bosch classixx 1200 washing machine which I have owned for a couple of years, machine gets worked fairly hard two three washes per day. Wife’s been happy with it until it started to continually take in water, seems to over fill slightly but go’s through its cycle until spin cycle then it stops. We can make it spin the cloths by selecting the spin cycle. This machine has a led display that normally counts down to zero when washing, I’ve noticed this has been erratic and is changing up and down. Is this the programmer at fault or could some other fault cause these symptoms, I’ve cleaned out the water pump filter, which was reasonably clean. 😯
CHANGE THE MOTOR BRUSHES 😆
Re: Bosch 1200 Classixx
bulldog wrote:
jimmyp wrote:
Hi guys, got a bosch classixx 1200 washing machine which I have owned for a couple of years, machine gets worked fairly hard two three washes per day. Wife’s been happy with it until it started to continually take in water, seems to over fill slightly but go’s through its cycle until spin cycle then it stops. We can make it spin the cloths by selecting the spin cycle. This machine has a led display that normally counts down to zero when washing, I’ve noticed this has been erratic and is changing up and down. Is this the programmer at fault or could some other fault cause these symptoms, I’ve cleaned out the water pump filter, which was reasonably clean. 😯CHANGE THE MOTOR BRUSHES 😆
sorry did nt read the whole fault also clean out the pressure system
hi gegsy
when you say valves do you mean the wires on the pressure switch, or the water intake valves. when the machine is set to spin it emptys the water and spins normaly. any other setting it constantly takes water in and pumps it out, never floods though. :rolls:
- You must be logged in to reply to this topic.