LG WM16115FD a/w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG WM16115FD a/w

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 16, 2007 at 8:30 am #29034
    Penguin45
    Participant

    Customer describes machine as “stopped and dead”. Anything obvious I should be looking for?

    Ta,
    Chris.

    July 16, 2007 at 8:04 pm #221220
    Penguin45
    Participant

    Re: LG WM16115FD a/w

    Surface mount fuse on power board had blown – looks like a triac gone on the big heatsinks. Soldering a “temporary” fuse across resulted in instant failure upon plugging in. Everything else meters out ok – is it safe to just go with a new board?

    Ta,
    Chris.

    July 16, 2007 at 8:20 pm #221221
    admin
    Keymaster

    Re: LG WM16115FD a/w

    Hi Chris

    This model when it first came out had massive failure rates on the main board,I ended up keeping 6 in stock,Once replaced there was no problem.

    Bryan

    July 16, 2007 at 8:25 pm #221222
    Penguin45
    Participant

    Re: LG WM16115FD a/w

    Thank you, Bryan.

    Chris.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.