Smeg cooker diagram

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg cooker diagram

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 17, 2007 at 9:00 am #29065
    Kenny
    Participant

    I have not worked on many of these so not shure of them

    I am looking for a wiring diagram for a Smeg cooker. I have been told the Mod No is 600ED0a

    Sounds like stray voltage to earth but I like to be prepared (have a feeling someone has been at it before me) and going to look at it tonight.

    Thanks

    July 17, 2007 at 1:26 pm #221366
    MDE
    Participant

    You seem to have the wrong MOD NO,please check it again.

    MARK

    July 17, 2007 at 8:37 pm #221367
    Kenny
    Participant

    Re: Smeg cooker diagram

    Thanks but that was all the info I was given at the time before I went to the job.

    Looked at it and it was shorting to earth as suspected. The owner had contacted SMEG and puchased a replacement simmerstat for £30 It was a blue colour and different shape from origonal. The origonals were the standard green simmerstats.

    When he put the cooker back together one of the casing screws (origonal not wrong screw) went through the casing and the tip of the screw was just contacting the live on the new simmerstat. Now the house is very old and has rewirable fuses. Resistance live to earth was about 2ohms through the tip of the screw and NOT lifting the fuse. So replaced simmerstat tested ok then live tested. At which point the owner took off his shoes touched the sink then touched the cooker and was happy that the cooker was no loger “buzzing” nor was he getting any shocks.

    I left him with a stern warning to get the house rewired as a matter of urgancy and that he had been extreamly lucky this time.

    Having said that shurley that was a design fault from SMEG?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.