Brandt Hob Problems – Is this Induction?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Brandt Hob Problems – Is this Induction?

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • July 26, 2007 at 3:45 pm #29297
    laurenceuk
    Participant

    Hi,

    I am going to this unit soon. I have no model number.

    The problem is that non of the rings work. This ocured suddenly.

    It is the type that does not have regulators but + & – symbols on the
    ceramic top which are touched to increase or decrease heat.

    Is this an induction type. I have no experience on these so is there any
    common faults I should be aware of.

    Any pointers would be helpful.

    Thanks

    Laurence

    July 26, 2007 at 4:34 pm #222653
    bzz67
    Participant

    Re: Brandt Hob Problems – Is this Induction?

    not sure if this induction,but i had one once with two rings suddenly stopped working.it was just a poor connection in the main switch on the wall.the flex had two lives and two neutrals.no go faults are usually simple to find.

    July 26, 2007 at 6:04 pm #222654
    laurenceuk
    Participant

    Re: Brandt Hob Problems – Is this Induction?

    Thanks for responding bz but I forgot to mention that the customer said a red light comes on and beeps on the top when a pan is put on it. 😳

    So there seems to be supply to the hob – but all things are worth checking.

    Thanks again

    Laurence

    July 26, 2007 at 7:01 pm #222655
    wench
    Participant

    The only thing that I have had similar to this ended up being a neutral fault on the terminal block. I’d love to hear how you get on with this! 🙂

    July 26, 2007 at 7:06 pm #222656
    robbo1973
    Participant

    Re: Brandt Hob Problems – Is this Induction?

    depends how old it is if this appeared suddenly and she has used this pan before then there is a fault.if it is an induction hob and she has just got this pan it may not be compatable with induction hobs. if a neon is coming on she has supply check links in term box on hob can knock rings off.

    good luck chris.

    July 27, 2007 at 2:17 pm #222657
    pup
    Participant

    Re: Brandt Hob Problems – Is this Induction?

    check if child lock on

    July 27, 2007 at 4:13 pm #222658
    laurenceuk
    Participant

    Re: Brandt Hob Problems – Is this Induction?

    Thanks folks,

    Great posts.

    Went today and it does appear to be the terminal block – all melted and the
    links badly burnt.

    My next question is were do I get Brandt parts as I need a new terminal
    block?

    Thanks again

    Laurence

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.