Bosch d/w SGS5318GB/12

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch d/w SGS5318GB/12

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 26, 2007 at 4:31 pm #29299
    senseib
    Participant

    Even when I reset the control module the circulating motor is running all the time on this machine & it wont drain unless i actuate the overfill switch.

    Can anyone advise?
    Brian.

    July 26, 2007 at 4:35 pm #222661
    Redflame
    Participant

    Re: Bosch d/w SGS5318GB/12

    Sounds to me like you have a live feed to the motor – Could be module fault or could be element down causing neutral fault. Anyone else ? Martin ?

    July 26, 2007 at 5:25 pm #222662
    senseib
    Participant

    Re: Bosch d/w SGS5318GB/12

    Thanks for your prompt reply Redflame. I tested both the heater element & the motor for earthing faults both ok.

    I suspect that it’s the control module, but always reassuring when others point the finger in the same direction.

    Does anyone know differently though?
    Brian.

    July 26, 2007 at 6:39 pm #222663
    gegsy
    Participant

    Re: Bosch d/w SGS5318GB/12

    Hi
    Have sent some info that may help you.

    Greg

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.