Hotpoint WF560P will only run spin cycle

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint WF560P will only run spin cycle

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 1, 2007 at 7:37 pm #29453
    vincentj
    Participant

    Hi I wonder can anyone help with this problem.
    My nephew tells me that his hotpoint (WF560P) will only spin.
    The symptoms he tells me are that the machine is loaded door shows as being locked, and no matter what position the controller is set at it will only do the spin cycle.

    This machine is just out of warranty (how unlucky I know).
    I hope someone can come up with the likely cause for this.

    If not enough info provided I will get back to him to raise any queries.

    Thanks for any help with this, Vin.

    August 1, 2007 at 9:02 pm #223135
    msappliance
    Participant

    Re: Hotpoint WF560P will only run spin cycle

    possibly a module ormotor fault you best get an engineer to look at this one

    August 2, 2007 at 10:40 am #223136
    iadom
    Moderator

    Re: Hotpoint WF560P will only run spin cycle

    It can be caused by a broken wire adjacent to the motor plug. Be sure to remove the mains plug if you intend to put your hands inside. 😉

    Jim.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.