How do I remove motor from Bosch WF02864GB

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › How do I remove motor from Bosch WF02864GB

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 4, 2007 at 3:18 pm #29511
    Winco
    Participant

    Hi, I have had this Bosch Maxxis for about 5 years and sure enough it has stopped spinning.

    I have read the forum and it looks like I need to change the brushes.

    However I have removed the two bolts that appear to hold the motor, and removed the loom to the motor but it is stuck firm.

    Any suggestions please?

    August 4, 2007 at 4:28 pm #223467
    Penguin45
    Participant

    Re: How do I remove motor from Bosch WF02864GB

    Big flat bladed screwdriver and a bit of leverage by the mounting lugs is the usual way.

    Power off, of course.

    Penguin45.

    August 4, 2007 at 10:52 pm #223468
    Winco
    Participant

    Re: How do I remove motor from Bosch WF02864GB

    Fantastic, finally worked but they were really tight.

    I swapped the brushes round to prove that was the problem and sure enough it has started spin again.

    Now where can I get the replacement brushes from.

    Thanks again everyone on this site, it has saved me an expensive bill or more likely throwing away a perfectly good machine before I needed to.

    August 4, 2007 at 10:58 pm #223469
    iadom
    Moderator

    Re: How do I remove motor from Bosch WF02864GB

    Winco wrote:Now where can I get the replacement brushes from.

    http://tinyurl.com/3dq3oy 😉

    Whatever you do, do not run the machine with worn brushes, a sure fire way to blow some expensive electronics.

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.