wpool dw f4 & f6

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wpool dw f4 & f6

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 7, 2007 at 3:09 pm #29569
    cab
    Participant

    hi, been out to a dishwasher ADP5966 for an F4 fault, it had drained ok, I took off the pump and checked for blockages, none. When I put it back onto a rinse it aborted after a few minutes washing with F6. Is it likely the optical sensor is at fault?

    thanks

    cab :bounce:

    August 7, 2007 at 4:00 pm #223657
    DentedPorsche
    Participant

    Re: wpool dw f4 & f6

    f4, check the black grid under the filters, make sure it’s not clogged with crud.
    f6, flow meter, unplug it, clean and tighten the plug and put it back on. works 99.9{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time.

    Brian

    August 7, 2007 at 4:51 pm #223658
    cab
    Participant

    Re: wpool dw f4 & f6

    thanks for that

    cab

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.