- This topic has 4 replies, 3 voices, and was last updated 18 years, 8 months ago by
.
-
Posts
-
hi,
I Have a problem with this DW
Machine is none responsive. It is displaying 3 light on and 1 flashing out of 5 lights. The order is:
1 off
2 on
3 on
4 on
5 flashing
any ideas! 😕Re: Diplomat Dishwasher or Brandt bdw 045
SMEG built machine – no drain detected in the time allowed.
Penguin45.
Re: Diplomat Dishwasher or Brandt bdw 045
hi again. I have Checked the pressure chamber, pipe, pressure switch, pump both electrically and physically but I Cant Find any problems or blockages. If I empty the machine of water it will refill but nothing else. I cant reset the control panel. Is this 14 month old machine a right pile s*** or am I loosing it? :taz:
Re: Diplomat Dishwasher or Brandt bdw 045
CLOGGER wrote:hi again. I have Checked the pressure chamber, pipe, pressure switch, pump both electrically and physically but I Cant Find any problems or blockages. If I empty the machine of water it will refill but nothing else. I cant reset the control panel. Is this 14 month old machine a right pile s*** or am I loosing it? :taz:
Neither i would suggest 😆
It’s not unknown for these to give a fault indication then lock out even when no fault is apparent, or even give a spurious fault indication for that matter…all you can do is check the obvious (earth faults etc), ohhh and the dispenser solenoid…then replace the pcb 😉
- You must be logged in to reply to this topic.