Hotpoint WD420 flashing

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #29694
    navid.v
    Participant

    Hi guys,

    we have had our machine for more than 2 years now,since last week it has started flashing and doesn’t work.I read the other threads but didn’t find an answer.

    At the moment,when you press start,it starts flashing fast,along with drying high heat + time saver buttons (slowly).so,it would be button 1 and 4.

    any idea what is wrong with it and how to repair it?
    much appreciated.

    thanks.

    #224152
    Simon46
    Participant

    Re: Hotpoint WD420 flashing

    Looks like the computer board may have lost its programming 🙁 . Power off if you are going to have a look yourself. Hotpoint may charge you £90 under the free parts warranty.

    Regards
    Simon

    #224153
    navid.v
    Participant

    Re: Hotpoint WD420 flashing

    thanks for the quick reply simon.I am no expert in these things,but with right instructions might be able to do it.any chance of instructions?
    thanks.

    #224154
    iadom
    Moderator

    Re: Hotpoint WD420 flashing

    You will not be able to re program the eeprom on the main PCB. Only Indesit Company authorised engineers have the software needed to perform this.

    The only way you could repair this machine yourself is to replace the control PCB & eeprom. The parts alone will cost you more than the Indesit Company Ltd’s labour charge of just under £90.00.

    Give them a call and take advantage of your five year parts guarantee.

    Jim.

    #224155
    navid.v
    Participant

    Re: Hotpoint WD420 flashing

    thanks for the precise info,will do that.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.