Indesit DI620

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Indesit DI620

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 13, 2007 at 10:59 am #29716
    streety44
    Participant

    My Indesit DI 620 dishwasher is 14 months old. and has stopped working. The bottom tray is full of water. When I epmty the water by hand the washer will begin a cycle but shut down after a minute with the tay full of water. Ive tried blowing the drainage tube through and it appears clear. The indicator lights say call an engineer. Any suggestions before I do so???????

    August 13, 2007 at 7:03 pm #224209
    Penguin45
    Participant

    Re: Indesit DI620

    L-R, 1-4, which lamps are flashing?

    Penguin45.

    August 13, 2007 at 7:15 pm #224210
    streety44
    Participant

    Re: Indesit DI620

    lamps 2 and three. I believe these are the ones that say call an engineer?

    August 13, 2007 at 7:21 pm #224211
    Penguin45
    Participant

    Re: Indesit DI620

    No fill detected in the time allowed…….

    Water turned off, fill hose kinked/crushed trapped or inlet valve failure are all possibilites. The first two you can check easily enough yourself.

    Power off if you need to investigate the water valve.

    Regards,
    Penguin45.

    August 13, 2007 at 9:17 pm #224212
    streety44
    Participant

    Re: Indesit DI620

    Thanks for that. Will give it a go and let you know 🙂

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.