Hotpoint WF 000P Washing Machine

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF 000P Washing Machine

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 15, 2007 at 8:57 am #29796
    WhiteVanMan1
    Participant

    Strange one this. The machine works fine, but the door won’t unlock at the end of the cycle, unless switched off at the socket. This is even if switched off by the on/off switch. Somehow the interlock is receiving a supply when it shouldn’t be. Any ideas? I suspect module.

    August 15, 2007 at 10:59 am #224751
    Martin
    Participant

    Re: Hotpoint WF 000P Washing Machine

    WhiteVanMan1 wrote:Any ideas? I suspect module.

    I wonder is the mains polarity is the wrong way round?

    August 19, 2007 at 10:58 am #224752
    electrofix
    Moderator

    Re: Hotpoint WF 000P Washing Machine

    main reversal should not affect if

    i assume the machine does not lock door until you press start

    would assume module failure is a fair diagnosis check for earth leakage just in case

    ring up tony at emw if it is a known fault he will have seen it

    Dave

    August 21, 2007 at 9:22 am #224753
    WhiteVanMan1
    Participant

    Re: Hotpoint WF 000P Washing Machine

    Thanks for the replies lads, I will check em out.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.