SGV5613GB/12

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › SGV5613GB/12

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 15, 2007 at 8:17 pm #29812
    rocker
    Participant

    Have no heat, traced neg line to heater but no postive line in, it seems to orginate from pcb, can anyone confirm this, as may need to order part, or is it posible to repair re-solder?. Thanks John.

    August 15, 2007 at 9:17 pm #224814
    gegsy
    Participant

    Re: SGV5613GB/12

    Hi
    Live feed from PCB through 85deg stat then onto heater.
    Neutral side is from mains switch and is fed to heater through the safety microswitch on heater.

    Greg

    August 15, 2007 at 10:12 pm #224815
    rocker
    Participant

    Re: SGV5613GB/12

    greg is the stat fitted to door as traced positive cable back to lower part of door then goes inside door,found no stat in line yet. john

    August 15, 2007 at 10:13 pm #224816
    gegsy
    Participant

    Re: SGV5613GB/12

    Stat will be on top of heater unit

    Greg

    August 15, 2007 at 11:09 pm #224817
    gegsy
    Participant

    Re: SGV5613GB/12

    Will send bumff over for your perusal 😉

    Greg

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.