Hpt WMA 10

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hpt WMA 10

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • August 18, 2007 at 12:42 pm #29878
    happycack
    Participant

    Machine does nothing except doorlock light flashes. Changed that but to no avail.
    Any head start clues?

    August 18, 2007 at 12:59 pm #225034
    senseib
    Participant

    Re: Hpt WMA 10

    control Board will have blown – sometimes you can repair them others you cant!

    Hope this helps,
    Brian.

    August 18, 2007 at 1:01 pm #225035
    Penguin45
    Participant

    Re: Hpt WMA 10

    Dead door lock, or blown board.

    How did you managed to change the door lock light? 😆

    Chris.

    August 18, 2007 at 4:26 pm #225036
    johnnyj
    Participant

    Re: Hpt WMA 10

    The 1603557 board is prone to this fault and no sign off blown tracks, i’ve changed a good few after trying door lock.

    August 18, 2007 at 5:49 pm #225037
    happycack
    Participant

    Re: Hpt WMA 10

    Thanks chaps, I’ll give her a quote monday.
    (presuming you are all male, anyone know of a female domestic appliance engineer?)

    August 18, 2007 at 6:00 pm #225038
    iadom
    Moderator

    Re: Hpt WMA 10

    happycack wrote:Thanks chaps, I’ll give her a quote monday.
    (presuming you are all male, anyone know of a female domestic appliance engineer?)

    There is at least one forum member of the fairer sex. 😉 and I don’t mean Gegsy. 😆

    Jim.

    August 18, 2007 at 6:34 pm #225039
    Penguin45
    Participant

    Re: Hpt WMA 10

    Mrs P can do a set of Hotpoint 95 bearings faster than I can…….

    Chris.

    August 18, 2007 at 6:57 pm #225040
    Bryan
    Participant

    Re: Hpt WMA 10

    happycack wrote:Thanks chaps, I’ll give her a quote monday.

    I’d make sure the motor and wiring tests all ok.
    Don’t know if it’s just my luck but I often find a faulty motor blowing the module on Hotpoint WMA range.

    Bryan

    August 19, 2007 at 10:37 am #225041
    electrofix
    Moderator

    Re: Hpt WMA 10

    had one the other week with this fault found out if i held start button until door locked machine then worked ok have not heard from customer since
    have not had one since to see whether this is a one off fix

    Dave

    August 19, 2007 at 9:52 pm #225042
    happycack
    Participant

    Thanks Dave, I’ll try that too. Can be a bit “suck it and see” this game sometimes.

    August 25, 2007 at 12:34 am #225043
    atech
    Participant

    Re: Hpt WMA 10

    Have you checked the door pecker? I have had a number of door lock faults and the door catch has been loose. IE there is not enough pressure on the door peg, to activate the interlock.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.