MW058 error 134?

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › MW058 error 134?

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 11, 2007 at 6:29 am #30452
    Kushman
    Participant

    My MW058k machine

    shows 5th and 8th lights soon as i hi the power button
    done diag test and showing the same lights

    error 134 i think?
    00001001

    Any help would be Great

    September 11, 2007 at 7:18 am #227267
    bigsmokepiker
    Moderator

    Re: MW058 error 134?

    Fault Code 9
    Size Setting error
    Have to reset Size Setting
    Press & Hold water temp up button then press to enter Size Setting mode
    To Set Size for 5Kg (Yours) press Wash temp up Button Then Power to Store

    To Check size is Set Start a Cycle

    September 11, 2007 at 11:43 am #227268
    Kushman
    Participant

    Re: MW058 error 134?

    ok got the size seting done, now the pump want turn off , even when power is turned off?

    error fualt 48 its showing

    September 11, 2007 at 10:37 pm #227269
    bigsmokepiker
    Moderator

    Re: MW058 error 134?

    Ok when you say pump wont turn off are you referring to water supply into machine (Inlet Valves) ?
    Turn Water supply off to cold Then hot Tap To see if both or one valve is the problem here
    If the power is off the Pump (Drain Pump) cannot Work

    Fault Code 48 is a Water valve Fault
    Could be Faulty Water inlet valve or Motor Controller (Main PCB)

    September 13, 2007 at 11:32 am #227270
    Kushman
    Participant

    Re: MW058 error 134?

    ok got it filling properly .. now it fills and doesnt wana go into wash mode, like it humps back n forward a few times but doesnt agitate?

    diag is now showing 140
    00110001

    dear god!

    September 13, 2007 at 7:36 pm #227271
    Penguin45
    Participant

    Re: MW058 error 134?

    00110001 = 49. Problem with cold valve – usually wiring related.

    I take it your middle name isn’t “Lucky”?

    Penguin45.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.